AutoCAD 2017 21.0 Patch With Serial Key [Mac/Win] ♛







AutoCAD 2017 21.0 Crack+ License Key Full Download X64 [March-2022]


In May 1995, Autodesk introduced AutoCAD LT (AutoCAD Less Than), a self-contained version of AutoCAD for microcomputers, and continued to market the software in this form until March 1999. At that time, Autodesk also introduced AutoCAD 2000, which was not designed for use on microcomputers, but could be used with the older AutoCAD software, which included AutoCAD LT.

By the time of Autodesk’s March 1999 introduction of AutoCAD 2000, the company had replaced its previous software on microcomputers with a new PC-based desktop version, Autodesk Architectural Desktop (formerly named AutoCAD Architecture Desktop), which had first appeared in April 1998.

Because AutoCAD was designed to run as a desktop application on microcomputers, its graphics features were limited. Unlike other desktop applications, such as Microsoft Word, AutoCAD used its own graphics engine to display and edit information. The AutoCAD user interface (UI), or user interface, was also different than that of most other desktop programs.

Autodesk developed AutoCAD in-house from 1975 through 1983, with the help of a number of outside development groups. The first AutoCAD software was based on the Department of Defense (DOD) Standard Graphics Language (SGL).

The first version of AutoCAD, named AutoCAD Release 1 (or AutoCAD 1.0), was released to the public on December 16, 1982. The first version of AutoCAD ran on DEC microcomputers, and included 2D and 3D drawing, graphic editing, and advanced 2D drawing functions. The first version of AutoCAD was also available as a Windows-based DOS application and a Macintosh application.

Initially, the DOS version of AutoCAD was one of two CAD programs included with new PC models. The other PC-based CAD program was CADIS, which was developed by Pronto Corporation. The DOS versions of AutoCAD and CADIS were also available as standalone products.

In May 1983, Autodesk hired Bill Penn a design engineer for development of its first SGL-based CAD program, and named the program AutoCAD. Autodesk developed AutoCAD on both the DEC and IBM platforms, and by 1986, it was one of three CAD programs listed as running on DOS.

AutoCAD 2017 21.0 Crack Registration Code For PC [Updated] 2022

Where the drawing is saved, and the drawing attributes are saved to the drawing, there is no specified location for the drawing file. The location is saved when the drawing file is created, and is not saved when the drawing file is exported or imported.

Autodesk Exchange Apps are shared extensions created by Autodesk for AutoCAD and that can be installed into the software (i.e. downloaded from a website). Some of these apps, however, are also available to the general public and can be found on Autodesk Exchange Apps.

There are also other format standards, such as PDF, SVG, and PPM, used for different purposes. PDF is used mainly for transferring information within the Autodesk ecosystem, and SVG is used mainly for technical illustration.

Autodesk Architectural Desktop and AutoCAD Architecture, Engineering & Construction allow editing and creating project-based CAD drawings. This is accomplished by importing, storing, and organizing CAD files to work for the project. AutoCAD Architecture, Engineering & Construction can also be used to create architectural, engineering, and construction drawings (Architectural Desktop) and for interior design (AutoCAD Interiors).

According to Jason J. Shaw in the Autodesk forums, AutoCAD is a registered trademark of Autodesk, Inc. Autodesk Architectural Desktop is one of the trademarks, along with AutoCAD Architecture, Engineering and Construction.

AutoCAD history
Autodesk released AutoCAD for the first time in March 1989, along with AutoCAD R14, a software development kit. AutoCAD for the R14 release consisted of the full AutoCAD toolkit with an optional set of extensions called « Draw » (now called « Architecture and Construction »).

In 1992, Autodesk released AutoCAD LT, and the AutoCAD Architecture and Construction « Draw » extensions were no longer supported. These extensions were replaced with new architecture-related « Author » extensions.

In 1999, the Draw extensions were renamed to « Drafting ».

AutoCAD 2009 introduced many new features, including new capabilities and tighter integration with AutoCAD LT 2009.

AutoCAD 2010 introduced the concept of a ‘property list’, and the entire process of modeling a building was greatly simplified. The AutoCAD Architecture property lists were introduced in AutoCAD 2010.

AutoCAD 2013 introduced the concept of’snap to’, allowing the creation of

AutoCAD 2017 21.0 Activation Code

Double-click the Autocad.exe shortcut on your desktop and select the « open » option.

Autocad will now be installed.

Open the Autocad icon in the start menu (double-click Autocad), and from the opening screen, click « edit » then « install ».

Once the installation is completed, the Autocad icon should now be in the start menu.

From the start menu, select « installation » then « editions ».

There you will see a table similar to the following with several versions of Autocad installed and their respective licenses:

With the latest version of Autocad installed, press the « enter » key.

This should take you to the license agreement screen.

Check the box for « OpenAutocad » and click « next ».

An installer will then be downloaded and will be installed automatically.

Autocad will now be open.

From the start menu, select « installation » then « editions ».

There you will see a table similar to the following with several versions of Autocad installed and their respective licenses:

Click « Autocad Premium » to confirm the license agreement.

In most cases, the license agreement can be accepted without any additional input or questions.

Click « OK » then « Finish ».

You will now have a new Autocad icon in the start menu.

If you open Autocad, it should automatically start.

You will now be prompted to log into the product.

Log in with the appropriate user ID and password (the information can be obtained from your Autocad reseller or your Autocad installation).

Click on « My Product » in the main menu, and select « Enterprise » on the top of the menu.

A screen similar to the following will appear:

Click « Yes » and click « next ».

You will be prompted to log into your Autocad.

Log in with the appropriate user ID and password (the information can be obtained from your Autocad reseller or your Autocad installation).

Click on « My Product » in the main menu, and select « Enterprise » on the top of the menu.

A screen similar to the following will appear:

Click « OK » and click « next ».

The product will be installed and will begin to process.

What’s New In AutoCAD?

Outlined Edge for curves: If your shape is already filled with a solid color or pattern, Outlined Edge for curves will add a black line around the edge of the line, to better illustrate the contours.

Designer Corner tab: The Designer Corner tab is activated and visible in the Layers panel when you select the name of a corner by double-clicking on it.

FlipArrows Button: Use the FlipArrows button to turn on or off the Display of Arrowheads.


Clone: Use Clone to add multiple copies of a single object to your drawing. Use Object Clone to add multiple copies of a single object type. Create 3D objects with the context-sensitive 3D Properties palette.

Annotate: Use Annotate to add comments to the drawing (text and attributes).

Object: Draw graphics and/or edit graphics in a special window.

3D: Draw 3D models and manipulate 3D objects in your drawing.

The Annotate Text dialog box:

Now you can Annotate and edit text and attributes in the Annotate Text dialog box.


The Snap tool is your best friend. The Snap tool allows you to precisely align two points on your drawing.

Smart Guide and Smart Snap:

Both new tools allow you to align a point to a rectangle, polyline, or line on the drawing.

Edge snap: If you press and hold the Shift key while dragging a line, it snaps to the nearest edge on the drawing.

Point snap: The point snaps to the nearest edge, curve, or point.

Selection snap: The selected object snaps to the closest selection edge.

Highlight, Highlighted selection:

Highlighted selections are highlighted with a darker color. This feature is particularly useful for making notes on a work area.


Measurements highlight scale in the drawing.

Lock Scales: Press the Shift key and use the up/down or right/left arrow keys to lock and unlock the scales of all objects.


New menu: Settings lets you make a single change or make multiple changes to the way that AutoCAD displays, calculates, or saves your drawings.

Paste Profiles and Paste Profile Manager:

Use Paste Profiles to

System Requirements:

OS: Windows Vista (32-bit or 64-bit) / Windows 7 (32-bit or 64-bit) / Windows 8.1 (32-bit or 64-bit)
CPU: 1 GHz or faster processor
RAM: 1 GB of RAM (2 GB or faster recommended)
Video Card: DirectX 9.0c Compatible Video Card (NVidia® Geforce® 8600 GT or ATI Radeon® HD4850 or better recommended)
DirectX: Version 9.0c

Laisser un commentaire

Votre adresse de messagerie ne sera pas publiée. Les champs obligatoires sont indiqués avec *